SURFACE PROFILE

PRODUCTS

Elcometer 224 Digital Surface Profile Gauge

Digital, fast and accurate surface profile inspection on flat and curved surfaces.
Fast, accurate and very user friendly, the Elcometer 224 Surface Profile Gauge is available with or without memory and Bluetooth.
The Elcometer 224 surface profile meter is available in two different models: Model B and Model T. Each surface profile gauge provides the user with increasing functionality - from the entry level Elcometer 224 Model B, to the top of the range Elcometer 224 Model T, with memory, alpha-numeric batching and Bluetooth communication.
Standard and armoured probes are available for the separate models, providing even greater measurement flexibility. Elcometer surface profile probes are supplied with a glass zero plate, calibration test foils and an Elcometer Test Certificate.

Elcometer 123 Surface Profile Gauge

This easy to use gauge measures the peak-to-valley height of blasted cleaned surfaces.
The Elcometer 123 Surface Profile Gauge is an easy to use analogue gauge which measures the peak-to-valley height of a blast cleaned surface in a similar way to the Elcometer 224 Digital Surface Profile Gauge.
Metric and Imperial versions available.

Elcometer 122 Testex Replica Tape

Provides a permanent mould of the peak-to-valley profile.
The Elcometer 122 Testex Replica Tape is designed to provide a permanent mould of the surface profile, which can then be measured using a thickness gauge.
Elcometer 122 Testex Tape consists of foam with a non-compressible backing. The foam side is rubbed into the surface providing a permanent mould of the peak-to-valley profile. The profile of the surface can then be measured using the Elcometer 124 Thickness Gauge.

Elcometer 124 Thickness Gauge

Used to measure the peak-to-valley height of a surface profile moulded in the Elcometer 122.
The Elcometer 124 Thickness Gauge is used to measure the peak-to-valley height of a surface profile moulded in the Elcometer 122 Testex Replica Tape.
Available in both Metric and Imperial versions
Quick and easy to use
Anvil pressure as required in the Standards.

Elcometer 125 Surface Comparators

These extremely durable surface comparators allow the estimation of surface profile of either grit or shot blasted surfaces.
Using the Elcometer 125 surface comparators as a reference the blasted profile can be compared to the four reference profile grades in each comparator. Profiles are recorded in microns.
4 Profile Values per Comparator.

Elcometer 127 Keane-Tator Surface Comparators & Magnifier

A range of Surface Comparators available in sand, shot or grit surface profiles.
The Elcometer 127 Surface Comparators are available in sand, shot or grit surface profiles.
Each surface comparator is supplied with 5 profile grades ranging from 0.5 - 5.5mils.
Designed for use with the Elcometer 127 illuminated magnifier, each surface comparator has a hole in the centre allowing for clear visual comparisons to be made.
5 Roughness Values per Comparator.

Elcometer 129 Rubert & Rugotest Surface Comparator

A range of comparators available in grit and shot versions used to estimate surface roughness.