PIPE COATOR - II
HIGHLIGHTS
PIPECOATER tools are
designed to coat the inside of pipe or tubing without
the need to rotate pipe or tubing and to apply an
even paint film thickness throughout. Generally, any
type of coating may be used in this tool that can be
airless sprayed. To obtain the best possible
production, one man should operate the Control Gun
while another man pulls the tool through the pipe or
tubing.
Any normal airless paint spray pump may be
used with the pipe coater tools,
however, the minimum pressure ratio
should be 30:1. for best results, use an
airless pump with a ratio of 45:1 and a
capacity of 2.5 u.s. gallons per minute.
Air requirement for PIPECOATER-II is 22 CFM at 95 to
100 psig (600 Litre/ Min at 7 BAR).
PIPECOATER-ll handles 7" to 37"(180mm to 950mm).
www.ciber.ae